I+W355- 10Xp45-R
Thermally conductive, electrically non-insulating, phase change material without silicone
| ID Code: | 183559 |
| Producator: | SEMIC EU |
| Pret cu TVA : | 265,4024 € |
| Pret fara TVA : | 219,3408 € |
| VAT: | 21 % |
| Disponibilitatea: | la cerere |
| Stocul total: | 0 m |
| Producator de marcare: | Xp45-W-10-R |
| Depozitul central Zdice: | 0 m |
| Stocarea externă (termen de livrare 5÷10 zile): | 0 m |
| Unitate:: | m |
| !_prehled mnozstevnich slev_! | Cantitatea | Pret fara TVA | Pret cu TVA | |
| 1 + | 219,3408 € | 265,4024 € | ||
| 2 + | 203,4735 € | 246,2029 € | ||
| 4 + | 197,9870 € | 239,5642 € | ||
| 6 + | 196,0134 € | 237,1762 € |
The ICT-Xp45-W-series is cost-efficient, electrically non-insulating and enriched with a high-heat conductive filler, solvent-and silicone-free high-performance phase change material.
The product group comprises three thickness units in total: 0,10mm, 0,20mm, 0,30mm All three products differ only by layer thickness.
Alternative replacement of thermally conductive paste - assure uniformity during assembly and increase durability of semiconductors by long-term material stability - no solvents and silicone evaporate, also suitable for applications in medical technology and optics. It is also an alternative to TIM applied to bases directly by the manufacturers - the advantage of variability, better transport and handling with modules, and there is no need to solve the expiration time of the modules prepared with TIM at the base. Only to watch storing temperature.
The product group comprises three thickness units in total: 0,10mm, 0,20mm, 0,30mm All three products differ only by layer thickness.
Alternative replacement of thermally conductive paste - assure uniformity during assembly and increase durability of semiconductors by long-term material stability - no solvents and silicone evaporate, also suitable for applications in medical technology and optics. It is also an alternative to TIM applied to bases directly by the manufacturers - the advantage of variability, better transport and handling with modules, and there is no need to solve the expiration time of the modules prepared with TIM at the base. Only to watch storing temperature.
Informaţii de bază:
| Producator de marcare | Xp45-W-10-R |
| Caz: | !_i+tape_! |
| Tip de componentă: | !_fillers_! |
| Configurare: | !_plain_! |
| Specificatii: | putty |
| Tipul de material: | !_conductive_! |
| Material: Carcasa | Non-Silicone |
| Culoare | GY - gri 40 % |
| RoHS | Da |
| REACH | Nu |
| NOVINKA | A |
| UL94 | V-0 |
Ambalaje şi greutate:
| Unitate: | m |
| Greutate: | 60 [g] |
| Tipul de ambalaj: | ROLL |
| Pachet mic (număr de unități): | 1 |
Termice și mecanice parametrii:
| Tmin (temperatura minimă de lucru) | -40 [°C] |
| Tmax (temperatura maximă de lucru) | 140 [°C] |
| Thermal conductivity | 3.5 W/m*K |
| Rth Thermal Impedance | 0.0064 K-in2/W |
| W - Lăţime | 355 [mm] |
| L - Lungime | 1000 [mm] |
| T - grosimea | 0.1 [mm] |
| PIN dimensiuni | 0.00 [mm] |
Alternative şi înlocuiri
| Alternativă 1: | 182439 - I+W300x600-IP50-F05-AL2 (STF) |